Monthly Archives

August 2016

Dr. Cory Glenn’s Implant Pearls and Products

By | Healthcare | No Comments

Based on Cory Glenn’s Dental Town Post ‘Cory Glenn’s Implant Pearls and Products‘.

If you have a Dental Town login you can see the discussion here: Dental Town Message Board

  • CBCT planning and guided surgery will save you money by decreasing the time needed for surgery, making your surgeries more precise, decreasing the need for lots of inventory, and making your restorative costs more predictable.
  • CBCT planning and guided surgery will make you more money through increased case acceptance, more referrals, giving you confidence to tackle more cases, and by helping determine which cases will be complicated and/or less profitable

Dr Glenn writes:

Which Implants To Use

Everyone’s titanium integrates……. some just integrate much cheaper!

  • Use a value branded implants with a good track record like Blue Sky Bio (my favorite)
  • Use a conical connection with a platform switch
  • Use implants with aggressive threading

Reduce Your Risks:  Failures are the Kiss of Death

  • Flap everything you can and bury the implants with primary closure in a 2 stage approach.
  • Flap rather than punch at uncover to gain keratinized gingival by rolling it to the buccal
  • Avoid immediate placement until you’re very experienced.  I suggest grafting all sites with                 Maxxues 50:50 Mineralized/Demineralized FDBA ($51 for 0.5cc) mixed with Fusion Bone Binder (Woodland Hills Pharmacy) and covered with a collaplug in single rooted teeth or a Cytoplast TXT-200 Nonresorbable membranes ($40) in molar sockets
  • Stick with shorter implants (8 and 10mm lengths).  There’s almost no value in a longer implant unless primary stability is of the utmost importance (ie immediate and single staged implants which you’re not going to do…… right!?
  • Stay 2-3 mm from anything with a name (inferior alveolar canal, mental foramen, etc)

Tips to do More Implants

  • Learn to do conservative crestal sinus lifts. 30% of all potential implant sites you encounter will need a sinus bump or a sinus lift.
  • Buy a CBCT.  Having to refer out for scans creates a much bigger barrier than you realize.  Most dentists find that the number of implants they do doubles once they get CBCT in office.
  • Plan cases in front of the patient.  The purpose is twofold:  you will be able to confidently tell them whether you can do the case and what it will cost right then and there.  It also creates a significant “wow factor” when your patients see you using this level of technology and planning.
  • Lower your prices.  Price is your gas pedal.  If you want to do more, step on the gas and lower fees.  A routine single tooth placed guided takes me an average of 2 hours total time and 3 appointments from start to finish.  Even by charging a bundle fee of $2500, you’ll still generate over $1,000 an hour.
  • Offer in house financing:  Implants are perfect for financing since they won’t get the final product for several months after starting the process.  Not staying current with payments? No implant crown for you!
  • New to Blue Sky Bio?  Listen to this webinar to learn more about the company, the owners, and their products. http://www.blueskybio.academy/public/New-to-BlueSkyBio.cfm

Recommended Product List for Guided Surgery

Read Full Post on Dental Town Including:

3d Printers… 
3d Printing Labs…
What you will need to get started…
Much More
.

Dental Town Message Board

Print a Popup Poldark

By | Printables | No Comments

Click the download button to make your own Popup Poldark to fit official Tomy Pop Up Pirate games.

The file is RoboxDual compatible, just drag the 3 .stl files into AutoMaker at the same time and select materials by double clicking on the group to select each part. If you have a single material printer the objects will print as a group.

Please note that Tomy and CEL advise not to insert anything except the original parts into the spring loaded device for safety reasons. 3D printed parts are not intended for children who may choke on small items.

TechSoft: “an amazing machine for such a low cost”

By | Education, News | No Comments

We’re very pleased to see leading education specialist TechSoft promote Robox as its No.1 choice of 3D printer for schools in their 2016-2017 Product Guide.

TechSoft was founded in the mid-1980s and soon established itself as a market-leading supplier of CAD and CAD/CAM systems. The TechSoft team have gained great insights into the technology needs and requirements of education in the years since and began supplying 3D printers to schools in 2004.

All of TechSoft’s sales and support staff are either ex-Design and Technology teachers, graduates in Design and related fields or qualified engineers. This means that they not only have a wealth of practical understanding but also understand the subject-specific issues teachers face on a daily basis.

TechSoft’s experience of low-cost 3D printers over the years allows the team to conclude that Robox “stands out from the crowd for accuracy, reliability, cost-effectiveness, ease of use and safety”. We couldn’t agree more. Thank you, TechSoft!

05TechSoft
03TechSoft
04TechSoft