All Posts By


More about CEL

By | News | No Comments

There are more 3d printers being announced all the time, it’s not surprising to see comments such as
“Another day Another Printer” Jack @

So I’d like to tell you more about CEL and why we will be able to design and manufacture the best consumer 3d printer.

In 2006 Chris Elsworthy met Kenneth Tam in a taxi in Hong Kong on the way to discuss a manufacturing process for another project  where Chris was working as a Design Engineer. They got talking about power tools and a design Chris had started that would allow a case of tools to have a huge amount of additional function – POWER8workshop. Kenneth’s manufacturing connections are extensive, a massive resource of manufacturing and component acquisition, he saw the value in the POWER8 and both he and Chris left their jobs and started CEL together.

POWER8workshop is a tool box with a set of cordless 18V power tools inside that each have additional functions. The drill detaches from its handle and fits onto the case to create a drill press/pillar drill. The circular saw flips and attaches to the lid to create a table saw. Other tools combine in different ways to create a huge range of functionality and it all packs away into a compact and portable case. The design of this product has been applauded by everyone who has seen it and represented a lot of design hours and millions of pounds of investment into tooling and electronics design. Several patents protect the design or POWER8workshop and its components. This high standard of mass manufacturing allowed CEL to continue through a tough recession to keep designing upgrades and making great tools.

In 2006 we had a single product, around 10 items making up the POWER8workshop. In 2013 we have several hundred products which we have designed and manufacture in several factories. These products are distributed all over the world where they are promoted, sold and serviced. Our UK site is a showcase of our design and manufacturing capabilities.

We have close contact with our customer base and design tools to meet specific needs. Feedback and suggestions have allowed us to improve designs, components, accessories and even the combinations we sell the tools in. We intend to continue and improve this feedback system into the development of Robox. Your input will help us to make the first release of Robox a success, following this first release your suggestions and stories will help us to further improve the design, to add extra features or to make changes that improve productivity, reliability and the whole user experience.

So we have all this experience in design and manufacturing, why do we need your help?
Robox is a simple machine but it has a huge range of variables, there are more variations in all aspects of this device than we could ever test alone. Variation in what goes into the machine such as consistent thickness of filament, it’s water content, the quality and purity of the material. Then there are all the types of material that can be fed into the machine and the additional variation in those. The extruder feeds the filament to the FFF head the temperature needs to be set to match the speed of extrusion so that the pressure is maintained to the print nozzle, again this varies based on the material and is affected by ambient temperature and humidity.  Next the bed needs to be suitable to accept the melted filament. Which material is best? Which temperature is best?
With the material melted correctly the head pressurised, the bed set up and at temperature we can begin laying down material. But how fast should the nozzle move, how far from the bed should it be? When should the nozzle close and how fast? When the nozzles swap from large to small should we wait while the outer perimeter hardens, how long? What is the best speed/temperature setting for a bridge or overhang of 20°, or for 45°? How should the printer be set for multi-colour or multi-material prints? What if the ambient temperature is extreme? What is going to happen when the bed is used 5000 times or more?

The list of variable conditions and settings we need to test is immense, we will simplify what we can into an easy to use program but need a test base of users to really nail down a set of instructions that can get the best from our printer and materials. Automaker™ is the name of the software,  we are lucky to have some brilliant programmers on board but this new software needs just as much testing as the physical parts and consumables of the printer.
We have the first parts from our factory scattered around the office in various states of assembly and our first samples of the best filament we could find have just arrived (it prints beautifully!).

CEL is not just another startup that had a good idea, we are more than capable of reaching our goals and delivering on our promises. There are a lot of other printers competing in the race for your interest and ultimately for you to invest in. Robox will be the first to arrive at the finish line ready to use and complete. We know this because we have done it before, CEL is not just “Another  Printer”.

Praise for CEL power tool products from the Dragons Den program broadcast on BBC  in 2010 –

Absolutely some of the best products I've seen come into The Den, you are a product genius.

Peter Jones - BBC Dragons Den

Its very impressive, you've got really good product there.

Deborah Meaden - BBC Dragons Den

I thought that that box was amazing. Really good.

James Caan - BBC Dragons Den

You're a great designer, it's a great product.

Duncan Bannatyne - BBC Dragons Den

To design something like this, which is practical, that is great British know how. Its fabulous.

Theo Paphitis - BBC Dragons Den


3D Print bed material choices

By | Prototype Build | 3 Comments

Robox® has a removable print bed, it simply clips in on top of the heater element. This allows us to provide a range of bed surfaces for different fused filament fabrication (FFF) or machining purposes when a different head is fitted to Robox. We are testing several materials to select one to be the standard bed for shipping with Robox, additional beds will be available that provide different performance on certain prints.

A lot of Robox users will tend to make most of their prints using PLA because it gives good results very quickly and easily with lower print temperatures and less shrinkage as it cools. ABS is much better for prototypes and items that will be used for more than display or visual checks, it is very strong and can be machined following printing, eg sanded or drilled without melting.

Our tests have shown that there are a few bed materials that have all the right properties to make an excellent all round print bed, we are testing the best way to make these beds remain flat over a range of temperatures and remain usable after a large number of prints, importantly they must be able to transfer heat into the printed parts to control shrinkage and the part must remain stuck to the surface.

Currently Glass and ThermoSurface are standing out as good options. We could supply the first FFF versions of Robox with either of these beds and it would perform very well.

We are tending to use a ThermoSurface sheet as our print bed as most of our prints these days are in ABS. The ThermoSurface bed when used in a controlled environment allows us to print objects using ABS that would often detach from the bed or warp and cause unwanted variations in the shape and finish of the printed part if we printed using a glass bed.

The perfectly flat surface of the bed is very important for many printed parts, particularly larger parts, ThermoSurface can deform much more than glass. This can effect the bottom surface of the part and the heat transfer from the heated bed underneath.
Glass on the other hand is naturally flat and extremely stable through a huge range of temperature or chemical environments. If we were only to offer printing in PLA then the glass bed would be an excellent option.

Glass is cheaper than any of the other materials we are testing, it can be simply cut to shape while other beds will require molding or other processes to work as we intend them too.

What would users want? A cheaper option that will cover the majority of their printing needs? Or a more expensive option that will allow a bigger range of materials and model shapes but which may need replacing after a certain number of prints? The various beds we make will all be available as add on or replacement items so a user can have the best properties of all of these beds. The question is which one do we include in the first package?


The image in this post is from


Welcome to the new Robox site

By | News | No Comments

Welcome to our new site!

We are very pleased to be able to show off a new product we are developing, its not just a 3d printer.

Please have a look around, there is a lot of information on here already that has not been made public yet. There a lot of other products that we designed and have manufactured available here

Thank you very much to Simpleweb in Bristol for their fast work in getting this site up. These guys went the extra mile (and a bit) allowing us to concentrate on the development of Robox.

There is a lot more to come, keep checking back and subscribe to our newsletter for more information. Please share what you find!

If you notice a problem please let me know by posting a comment below.

Exciting times! – Robox® Dual nozzle 3d printer prototype testing

By | Prototype Build | 2 Comments

I’m watching over Chris Elsworthy’s shoulder – actually under his armpit…he is a tall man – while eating my lunch.

There is a definite sense of excitement in the office.  We are usually heads down working hard to bring the many elements of Robox from plan to reality. Right now though, everyone is watching Chris’s desk.

Following closely behind some unrepeatable language and burned fingers there is a print happening in one of our prototype Robox dual nozzle 3d printer units.
This print is the first of its kind, not the content but the method. It has come from months of work on electronics, firmware and software as well as a very simple but ingenious mechanical nozzle change system.

2 different size nozzles operating on a single set of instructions to build an object. Using the fine nozzle for the outline and details while using the large nozzle to fill the parts. There is a lot of fine tuning to do but the test print I can see is progressing really fast. Hours of sketching, theory, coding and design have finally come to this AND ITS AWESOME!

Chris E, Ian H and Ben W, nice work chaps.