We’re pleased to announce that AutoMaker version 2.01.02 for the CEL Robox printer is now available. The key changes from 2.01.01 are listed below:
Version 2.01.02
- Autoupdate now uses port 80 rather than port 8001
- Added Support Gap function - see this post for more information
- This controls the vertical distance between the support material and model material which affects how easily support material can be removed
- Disabled automatically if support material is different to model material (useful when using specialised peel-off support material)
- Horizontal (Support XY Distance) and vertical (Support Z Distance) offsets are configured in the Print Profiles page
- If Support Gap is enabled the system will introduce a vertical gap between support and model material
- If Support Gap is disabled there will be no gap between support and model material
- Improved filament saver function for dual material printing (automatic heater control during prints)
- Grouped advanced mode controls onto an Advanced Mode menu on the Preferences page
- Automatic selection of correct head type on profile page
- Modified status display to make use of Material 1 and Material 2 clearer
When AutoMaker updates are available your system will usually find and offer an update automatically. If you are behind a firewall or some other system which prevents this, please visit www.cel-robox.com/downloads/ and download the most recent AutoMaker package.
AutoMaker sometimes needs to update the firmware on your printer. Please allow the firmware to update as requested by AutoMaker. If you do not allow the firmware update to take place, AutoMaker may not be able to communicate with your printer.
IMPORTANT NOTE: a firmware update will power cycle your printer so ensure no operations such as a print or calibration are running at the time of the firmware update.
