TACO

Hello everyone.
I got Dave’s plan to be used only half. I tried changing the PTFE tube of the intake part by about 30 mm from the exit and changing the pass of normal Filament and the path of NijaFlex.
As you can see, if two coexists in the state of dismissing, it will become an appropriate resistance, but if it is only one, it feels like there is…[Read more]

<span id=”result_box” lang=”en” tabindex=”-1″>Hello everyone.
I got Kent’s plan to be used only half. I tried changing the PTFE tube of the intake part by about 30 mm from the exit and changing the pass of normal Filament and the path of NijaFlex.
As you can see, if two coexists in the state of dismissing, it will become an appropriate resistance,…[Read more]

<span id=”result_box” class=”short_text” lang=”en”>Martin, thanks for your comment.</span>

BHudson, Thanks for the advice.

Yes, the letters are on surface.
I performed the calibration again on the weekend, and I tried test printing though it was PLA.
The attached file is a flat type model, with the white part being horizontal with raft, black c…[Read more]

Thanks for advice, pete
I will try several calibration and re-print at weekend.

<span id=”result_box” lang=”en”>Pete Thank you for your comment.

I am operating CELROBOX for about 15 months, but I tried and tried in white monochrome and made using 0.3 mm nozzle with Z axis resolution using white monochrome on the right side of the photo, similarly with 2 color printing It is a picture in the middle that I tested (Speed is…[Read more]

Thanks for comment all.
I tried some approach next follow site tips but my print object was very very small.
I want to get more small head nozzle ;(.

https://www.3dhubs.com/talk/thread/printing-dual-colour-text

Hello everyone.
I used the AM 2.01.03, I noticed that there is still a problem with the temperature display.
Please check attached files.
I hope that it is possible to fix in the next version.

Thanks all.
I understood that tiny parts should keep multiple units and adjust clearance.
When I was fitting to trial real nut and screw, it was found to be a reasonably practical by reducing the layer and the printed part is functional as each component.

TACO

Hi Pete
I will help as much as possible. If anything, for me to write in English to this board, it is more a high hurdle. :p

Thanks BHudson! I undastood.
I am excited about the exact print quality :).