RESOLVED: Problem with vase printing - Spiral print is not supported

[Edmond Dyogi @eddyogi My Robox is a Green Kickstarter Early Bird]

Okay, understood. Thanks! 🙂

Select your profile AND click spiral print box.

3d printing enthusiast
Replicator 2
Mojo
Makergear M2

[Alain @teleporteur My Robox is a Blue Commercial Version]

For this to work, the wall of the glass does not have thickness
and there is an error at load “not closed”… but it prints well.
Setting: 5 layers, thickness of 0.20 mm layers
nozzle 0.3 mm extrusion width 0.50 mm
with a standard XT colorfabb wire adjustment

Attachments:

You must be logged in to view attached files.

[Microcan @microcan My Robox is a Blue Commercial Version]

Nice does this mean you print a part with a single unbroken string of fused filament. Is the model also stronger this way?

[Pete @pete I have both RoboxDual and other Robox versions CEL HQ Bristol UK]

yes, once the base is complete the Z value will constantly increase while X and Y follow the outline of the shape, the extruder will constantly push material through the open nozzle until the part is complete.

For official support please visit www.cel-robox.com/support/ and create a ticket

[Edmond Dyogi @eddyogi My Robox is a Green Kickstarter Early Bird]

@chrisyt

Your spiral profile worked well but something weird happened.

If you look at the photo I uploaded, the robox mug on the right printed very well with polymaker pc-plus clear. The other vase to the left was also printed with polymaker pc-plus with your profile but it came out cloudy. Any ideas?

By the way, I tested both with boiling water and both held up really well, no leaks. 🙂

Attachments:

You must be logged in to view attached files.

3d printing enthusiast
Replicator 2
Mojo
Makergear M2

[Alexandre Contat @calexfr I have both RoboxDual and other Robox versions France]

Hi, I done this french translation of the Pete article’s : http://www.distudio3d.fr/blog/mode-spirale-sur-automaker-robox

But I am not sure of the good parameters in Automaker because of him poor french translation (and my not good english, okey 😉 ) but could you please post screenshots of your parameters, it’s more powerfull than long texts 😉

Regards

Alex from France
diStudio3D

[Alain @teleporteur My Robox is a Blue Commercial Version]

Alexandre, @calexfr

dans le chapitre “Pensez à l’épaisseur de la base.” il faut connaitre l’épaisseur réel de la base de l’objet et faire le calcul de la couche / hauteur de la couche pour que cela corresponde sinon
il y aura des erreurs…

 

Alain

[Alexandre Contat @calexfr I have both RoboxDual and other Robox versions France]

Merci Alain, vous êtes français ?

Regards

Alex from France
diStudio3D

[Author]

Posts